Model: SE-130WA-TTL
Specifications:
WLAN
- Atheros Chip Set : Atheros/AR2317 40 MHz , SDRAM:16 M , FLASH ROM : 4M
- Standard Compliance: IEEE 802.11b/g
- Spread Spectrum Technology: DSSS, OFDM
- Tx Power 11b: Maximum 20 dBm
- Tx Power 11g: Maximum 18 dBm
- Rx Sensitivity: -70 dBm @ 54 Mbps, -85 dBm @ 11Mbps
- Transmission Rate: 54 Mbps (max.) with auto fallback (54,48, 36, 24, 18, 12, 11, 9, 6, 5.5, 2, 1 Mbps)
- Transmission distance: Up to 100 meters(@12 Mbps, in open areas)
- Security: WEP 64-bit/128-bit data encryption, AES, WPA2
- Antenna Connector: Reverse SMA , 2 dBi Antenna
- Network Mode: Infrastructure, Ad-Hoc
LAN (for configuration / Ethernet hub)
- Ethernet: 10/100 Mbps, RJ45
- Protection: Built-in 1.5 KV magnetic isolation
Serial
- No. of ports: 1 * RS-232 TTL port
- RS-232 TTL Signals: TxD, RxD, GND
- Serial Line Protection: 15 KV ESD for all signals
Serial Communication Parameters
- Parity: None, Even, Odd, Space, Mark
- Data bits: 5, 6, 7, 8
- Stop bits: 1, 1.5, 2
- Flow control: XON/XOFF
- Speed: 110 bps to 115.2 Kbps
Power Requirements: Power input * 1: DC5V, 1A
Operating Temperature: -10 to 55ºC (32 to 131ºF ), 5 to 95% RH
Storage Temperature: -20 to 70ºC (-4 to 185ºF), 5 to 95%RH
Regulatory Approvals: RoHS, EMC (FCC Class A, CE Class A)
Software Features
- Protocols: ICMP, IP, TCP, UDP, DHCP, BootP, ARP / RARP, DNS, SNMP MIB II, HTTP, SMTP, SNTP
- Serial mode: Virtual Com / TCP Server / TCP Client / UDP / Serial Tunnel with advanced settings of:
- TCP Alive Check Timeout
- Inactivity Timeout
- Delimiter for Data Packing
- Force TX Timeout for Data Packing - 4 Hosts simultaneous connection: Virtual Com / TCP server / TCP Client (only raw data)
- Security: HTTPS
- Event Notification: by email / SNMP trap / Syslog
SNMP Trap
- Cold/Warm Start
- IP Changed
- Authentication Fail
SNMP Response
- System MIB
- Interface MIB
- ICMP, IP, TCP MIB
- UDP MIB
- Utilities: Windows NT/2000/XP/2003/VISTA
- Device discovery
- Auto IP report
- Device setting (run-time change, no rebooting)
- Access control list
- Group setting
- Device monitoring
- Serial port monitoring
- Log info
Virtual COM/TTY Drivers:
WDM mode, configuration in windows Device Manager (for Windows NT/2000/XP/2003, VISTA)
Application Diagram:
