SE731
1 x RS232
1 x RS485/RS422 (Auto Detect)
Ethernet
Provides over IP access for industrial serial devices
Wide range of versatile serial operation modes – TCP Server, TCP Client, UDP, Virtual COM, Modbus, and Serial Tunnel
System configuration via Web Browser (HTTP) and Windows utility
This 3-in-1 Serial Device Server supports RS-232, RS-422 and RS-485 data transfers, as well as providing Ethernet connectivity for a wide variety of serial devices used in commercial applications. These include industrial control,data acquisition, access control, environment monitoring,banking, telecoms, remote site management, etc. This total serial data transfer system transforms the capability of legacy serial devices, and allows them to take advantage of the speed and reliability of today’s modern communication techniques.
Serial to Ethernet
Modbus RTU to RTU via Serial Tunnel
Simple and Straight configuration via web interface
Configure everything in just one web page
Serial Device Server
| CPU | TI 32-bit ARM Cortex-M4 CPU , 120 MHz ( TI ) |
| RAM | 256K bytes SRAM |
| ROM | 1M bytes Flash ROM |
| Network | |
| Port Type : RJ-45 Connector 10 / 100 Mbps ( Auto Detect ) | |
| Protocol : ARP , IP , ICMP , UDP , TCP , HTTP , DHCP | |
| Mode: TCP Server / TCP Client / UDP / Virtual Com / Pairing | |
| Setup : HTTP Browser Setup ( IE ) | |
| Security : Login Password | |
| Protection : Built-in 1.5KV Magnetic Isolation | |
| Serial Port | |
| 1 x RS232 (DB9) + 1 x RS485/RS422 (Auto Detect) | |
| Speed : 300 bps ~ 230.4 Kbps | |
| Parity : None , Odd , Even , Mark , Space | |
| Data Bit : 5 , 6 , 7 , 8 | |
| Stop Bit : 1 , 2 | |
| Port-1 : RS232 Pins : Rx , Tx , GND , RTS , CTS , DTR , DSR , DCD | |
| Port-2 | |
| RS422 Pins : Rx+ , Rx- , Tx+ , Tx- ( Surge Protect ) | |
| RS485 Pins : Data+ , Data- ( Surge Protect ) | |
| Built-in RS422 / RS485 pull high / low Resistor | |
| 15KV ESD for all signals | |
| Reset | 1 x Semi-recessed Pushbutton |
| TTL GPIO | 16 |
| Watch Dog | Yes |
| Softwares | |
| IP Search Utility : Support Win-8, Win-7 , Vista , Win-XP , Win-2003 server , Win-10 | |
| Virtual COM : Support Windows 2000 / 2003 / XP / Vista / Win-7/ Win-8/ Win-10 | |
| Firmware Update | On-line via Ethernet |
| Power | |
| Power : DC 9 ~ 30 V , 300mA @ 12VDC , DC Jack & Terminal Block | |
| PoE : Power Input Option (PoE model only) | |
| LED | SYS ( PWR ) , LAN , Rx1 , Tx1 , RX2 , TX2 |
| Environmental | |
| Operating Temperature : -10°C ~ +70°C | |
| Storage Temperature : -20°C ~ +85°C | |
| Physical Properties | |
| Dimension : 90 x 60 x 20 mm ( W x D x H ) | |
| Weight : 100 g | |
| Din Rail Mounting | Optional |
| Compliance | CE , FCC , RoHS Compliant |
| Warranty | 1 year |
| Model | Description |
| SE731 | 2 Serial ports to Ethernet Device Server |
| SE731P | 2 Serial ports to Ethernet Device Server with PoE |
| File | Description | File size |
|---|---|---|
IP Search Utility CVBrowser
|
|
248 KB |
|
Virtual COM Utility - VSerPort 2.8.1
|
|
2 MB |
SE731 SE730 User Manual
|
|
2 MB |