PM130IS – Ethernet Modbus TCP to RTU/ASCII with Isolation

1 x RS232/422/485, Isolation, TCP to RTU/ASCII

Application DiagramSpecificationsInquiry

Send Modbus TCP commands over Ethernet / WiFi to get Modbus RTU data

CPU : 32-bits ARM7 CPU , 80 MHz
RAM : 8 M Bytes SDRAM
ROM : 4 M Bytes Flash ROM
OS : uClinux OS
Ethernet : RJ-45 Connector, 10/100 Mbps (Auto Detect)

TCP Master to RTU Slave
TCP Master to ASCII Slave
RTU Master to TCP Slave
ASCII Master to TCP Slave

TCP Master to RTU/ASCII Slave
8 simultaneous TCP user connection and polling, 244 serial chained RTU/ASCII Slave.
32 simultaneous Request for each TCP Master.

RTU/ASCII Master to TCP Slave
8 simultaneous TCP user connection and polling (mapped via user defined Slave ID range)

Slave ID is not recommended to use 0 and 245~255 if you are not sure if these numbers are already used or not as ID in your environment. Because usually 0 is used for broadcast and 245~255 are used for else purpose.

Utility : Built-in Web server Setup, Easy Operation
Mode : TCP Server / TCP Client / UDP
Setup : HTTP Browser Setup (IE & Netscape) , Console
Security : Setup Password
Protection : Built-in 1.5KV Magnetic Isolation

Serial Port
1 x RS232 or 1 x RS422/RS-485 ( software select)
Speed : 300 bps ~ 230.4 Kbps
Parity : None, Odd, Even, Mark, Space
Data Bit : 5, 6, 7, 8
Stop Bit : 1, 2
RS232 Pins : Rx, Tx, GND, RTS, CTS, DTR, DSR, DCD
RS422 : Rx+, Rx-, Tx+, Tx- (Surge Protect)
RS485 : Data+, Data- (Surge Protect)
Built-in RS422/RS485 Terminal Resistor
15KV ESD for all signals
3000V DC Isolation

Watch Dog Function
Power : DC12V, 1A
Led Lamp : SYS (PWR), LAN, LED 1, LED 2 ( User Define )
Operating Temperature : 0ºC ~ 70ºC
Storage Temperature : -10ºC ~ 80ºC
Dimension : 100 x 90 x 25 mm ( W x D x H )
Weight : 140g
Support DIN-Rail or Wall mount
RoHS : Compliant with RoHS
Regulatory Approvals : EMC: FCC Class A, CE Class A
Warranty : 1 year

    Please complete and submit the following form, we will respond to you as soon as possible.

    Print Friendly, PDF & Email