ES800P – Industrial Managed Ethernet Switch with PoE

8-port, 10/100 Mbps, PoE

SpecificationsSpecificationsConfiguration InterfaceInquiryDownload

This Ethernet switch is a slim type unmanaged PoE Ethernet switch with P.S.E. function. It supports Power over Ethernet, a system to transmit electrical power, along with data, to remote devices over standard twisted-pair cable in an Ethernet network. This switch Hub has 8X10/100Base-T(X) P.S.E. (Power Sourcing Equipment) ports. P.S.E. is a device (switch or hub for instance) that will provide power in a PoE setup. The wide operating temperature range from -20ºC to 70ºC can satisfy most of operating environment.

Provide 8×10/100Base-T(X) PoE (P.S.E.) ports
Supports IEEE 802.3at compliant PoE and total power budget is 180 Watts with maximum 30 Watts per port
Support auto-negotiation and auto-MDI/MDI-X
Support store and forward transmission
Support flow control
Warning system by relay output
DIN-Rail feasible

Application

This Ethernet switch can be used in connecting several PoE P.D. Ethernet devices like IP-Camera or other Ethernet devices. In addition, there are two different power inputs at terminal block to avoid interruption caused by power down. When the primary DC power input fails, the backup power input will take over immediately to guarantee a non-stop operation.

PoE Pin Definition
10/100Base-T(X) P.S.E. RJ-45 port Pin Definition

Pin No. Description
1 TD+ with PoE Power input +
2 TD- with PoE Power input +
3 RD+ with PoE Power input –
6 RD- with PoE Power input –

Physical Ports: 8 ports 10/100Base-T(X) in RJ45, Auto MDI/MDIX with P.S.E

Ethernet Standards
IEEE 802.3 for 10Base-T
IEEE 802.3u for 100Base-TX
IEEE 802.3x for Flow control
IEEE 802.3at PoE specification (total power budget is 180Watts with maximum 30Watts per port)

MAC Table : 1K MAC addresses
Processing : Store-and-Forward

Indicator LED
Power LED indicator : Green x 2
Fault LED Indicator : Amber IndicateS PWR1 or PWR2 failure
10/100Base-T(X) RJ45 Port Indicator and PoE indicator:Green for port Link/Act.
Green for PoE power injected.

DIP-Switch 1 : for Power-2 failure warning : (ON) enable, (OFF) disable
DIP-Switch 2 : for Power-1 failure warning : (ON) enable, (OFF) disable
Fault Contact : Relay output to carry capacity of 1A at 24VDC
Redundant Input Power : Dual DC inputs. 50~57VDC on 6-pin terminal block.
Power Consumption (Typical) : 3.4 Watts (power consumption of P.S.E. is not included)
Overload Current Protection : present
Reverse Polarity Protection : present
Enclosure : IP-30
Dimension : 26.1 x 94.9 x 144.3 mm (W x D x H)
Weight : 441 g
Storage Temperature : -40 ~ 85ºC
Operating Temperature : -20 ~ 70ºC
Operating Humidity 5% to 95% Non-condensing

Regulatory Approvals
EMI : FCC Part 15, CISPR (EN55022) class A
EMS : EN61000-4-2 (ESD), EN61000-4-3 (RS), EN61000-4-4 (EFT), EN61000-4-5 (Surge), EN61000-4-6 (CS), EN61000-4-8, EN61000-4-11
Shock IEC60068-2-27
Free Fall : IEC60068-2-32
Vibration : IEC60068-2-6
Safety : EN60950-1

Please complete and submit the following form, we will respond to you as soon as possible.

 

Close Menu