Pi641 – Raspberry Pi 4 IoT Linux Programmable Controller with Digital Input Digital Output

Ethernet, WiFi, Bluetooth, Serial Port, GPIO, HDMI, I2C, SD, USB, RTC, Buzzer, M.2 (for 5G/SSD), Mini-PCIe (for 4G/LoRa), DI*8, DO*4

FeaturesSpecificationsProduct PhotoOrdering InformationInquiryDownload

Built-in Raspberry Pi 4B (optional)
Wide Range Input Power DC9~32V
Power Switch
Multiple I/O Interfaces
Powerful Computing capability
CPU Heatsink Transfer Heat To Metal Housing
Ethernet, WiFi, Bluetooth, Serial Port, GPIO, HDMI, I2C, SD, USB, RTC, Buzzer, M.2 (for 5G/SSD), Mini-PCIe (for 4G/LoRa)

SD interface : micro SD card (8/16/32 G OS & storage) (optional)
RTC Real Time Clock x 1 (Battery backup)
Buzzer x 1
Console port x 1 (RS232)
Watch Dog function
I2C interface x 1 port (built-in)
SPI interface (onboard)
Display port interface (DSI on raspberry pi onboard)
Camera port interface (CSI on raspberry pi onboard)

Pi 4 Controller Board

M.2 to USB 3.0 interface for 5G / SSD
Mini-PCIe to USB 2.0 for 4G / NB-IoT / LoRa
SIM slot for 4G / 5G

Serial port RS232/485/422 x 1 (RS485/422 Surge Protect)

Digital Input / Output GPIO x 12 pins (onboard)
Digital Input x 8 pin (Active High / Active Low Selective)
Dry contact
Logic level 0 : close to GND
Logic level 1 : open
Wet contact
Logic level 0 : 0~3 V
Logic level 1 : 10~30 V
Digital Output x 4 pin (Active High / Active Low Selective)
120VAC @ 3A , 240VAC @ 3A , 24VDC @ 5A

LED indicator : SYS (PWR) , 5G , User , Serial , DO , DI

Operating Temperature : -10 ~ 60 ºC
Storage Temperature : -15 ~ 70 ºC
Dimension : 200 x 120 x 50 mm (W x D x H)
Weight : 850 ± 5 g
Casing : Metal
Power : DC 9~32V, 1000mA (Support DC Jack and Terminal input)

Specifications are subject to change without prior notice

Pi 4B Module (optional)

Broadcom BCM2711, Quad core Cortex-A72 (ARM v8) 64-bit SoC @ 1.5GHz
2GB, 4GB or 8GB LPDDR4-3200 SDRAM (depending on model)
2.4 GHz and 5.0 GHz IEEE 802.11ac wireless, Bluetooth 5.0, BLE
Gigabit Ethernet
2 USB 3.0 ports; 2 USB 2.0 ports.
Raspberry Pi standard 40 pin GPIO header (fully backwards compatible with previous boards)
2 × micro-HDMI ports (up to 4kp60 supported)
2-lane MIPI DSI display port
2-lane MIPI CSI camera port
4-pole stereo audio and composite video port
H.265 (4kp60 decode), H264 (1080p60 decode, 1080p30 encode)
OpenGL ES 3.0 graphics
Micro-SD card slot for loading operating system and data storage
5V DC via USB-C connector (minimum 3A*)
5V DC via GPIO header (minimum 3A*)
Power over Ethernet (PoE) enabled (requires separate PoE HAT)
Operating temperature: 0 – 50 degrees C ambient

*The correct specifications are based on the Raspberry Association’s announcement

Model NameDescription
Pi640Pi 4 Controller Board + Casing
Pi 4 Linux IoT Controller Board with Casing, 1*RS232/485/422, RTC, Buzzer, I2C, SPI, M.2 for 5G, mini-PCIe for 4G/NB-IoT, SIM Slot, 1*DI, 1*DO, USB Connector between Pi 4 Controller and Pi 4 Module
Pi641Pi 4 Controller Board + 8*DI and 4*DO + Casing
Pi 4 Linux IoT Controller Board with Casing, 1*RS232/485/422, RTC, Buzzer, I2C, SPI, M.2 for 5G, mini-PCIe for 4G/NB-IoT, SIM Slot, 8*DI, 4*DO, USB Connector between Pi 4 Controller and Pi 4 Module
Pi640EBPi 4 Linux Controller Board, 1*RS232/485/422, RTC, Buzzer, I2C, SPI, M.2 for 5G, mini-PCIe for 4G/NB-IoT, SIM Slot, 1*DI, 1*DO, USB3.0 Connector to Pi 4B
Pi 4B 2GPi 4B Board with 2G RAM, 1*Ethernet, 1*WiFi/BLE, 2*microHDMI, 2*USB3.0, 2*USB2.0
Pi 4B 4GPi 4B Board with 4G RAM, 1*Ethernet, 1*WiFi/BLE, 2*microHDMI, 2*USB3.0, 2*USB2.0
Pi 4B 8GPi 4B Board with 8G RAM, 1*Ethernet, 1*WiFi/BLE, 2*microHDMI, 2*USB3.0, 2*USB2.0
micro SD cardmicro SD card High Endurance 16GB
WiFi BLE IPAX antennaIPAX cable & antenna for Pi 4B onboard WiFi+BLE
4G 7600G mPCIe4G SIMCOM 7600G CAT4 mini PCIe (USB) incl. one set of IPAX cable & antenna
5G 8202G M2B5G SIMCOM 8202G M.2 Key B USB 3.0 incl. 2 sets of IPAX cable & antenna
5G MV31W M2B5G Thales MV-31W M.2 Key B USB3.0 incl. 2 sets of Ipax cable & antenna
5G IPAX antennaExtra set of IPAX cable & antenna for 5G
5G maximum performance will be reached when up to 4 sets of IPAX & antenna is installed
Power switchPower switch with cable for connecting to board
Power supplyPower supply, 12V/2A, Input:100~240V
D84Digital I/O board with cable, 8*DI, 4*DO

    Please complete and submit the following form, we will respond to you as soon as possible.



    Downloads

    File Description File size
    txt config.txt for Pi640 Raspberry Pi 4B config.txt for Pi640 Raspberry Pi 4B
    2 KB
    mypi.sh for Pi640 Raspberry Pi 4B mypi.sh for Pi640 Raspberry Pi 4B
    3 KB
    Print Friendly, PDF & Email