902~928 MHz
Extension cable x 1 (1/3/5/10 meter)
SpecificationsSignal DiagramUnboxing VideoOn-site SceneOrdering InformationResources
This directional outdoor panel antenna, using ABS material, has a high gain, good transmission quality, good focusing effect, strong radiation collection ability and strong wind resistance ability.
Wireless IoT radio frequency technology is widely used in industrial automation, commercial automation, and transportation control management equipment systems.
Specification
| Frequency Range | 902~928 Mhz |
| Bandwidth | 26 MHz |
| Front to Back Ratio | ≥ 15 dB |
| VSWR | ≤ 1.5 |
| Radioactivity | Direction |
| Horizontal Beam Width | 60° |
| Vertical Beam Width | 70° |
| Gain | 9 dBi |
| Polarization mode | Circular or Linear |
| Lightning protection | DC Grounded |
| Input Maximum Power | 100 W |
| Impedance | 50 Ω |
| Connector | N Female |
| Radome Material | ABS |
| Installation Method | Pole Mount ( Pole diameter Ø30 ~ Ø50 mm , Pole not included) |
| Dimension | 255 * 255 * 45 mm |
| Weight | 900 g |
| Operation Temperature | -40°C ~ +70°C |
| Wind Resistance | 60m/s |
Signal Diagram
Unboxing the Directional Outdoor Panel Antenna
Scene of On-site Panel Outdoor Antenna Mounting
Omni & panel antenna extension cable length can be as below
| Cable length | Outer diameter | Remark |
| 1 meter | 5 mm | |
| 3 meters | 5 mm | |
| 5 meters | 10 mm | Outer diameter 10 mm is recommended for cable longer than 3 meters |
| 10 meters | 10 mm | Outer diameter 10 mm is recommended for cable longer than 3 meters |
| File | Description | File size |
|---|---|---|
N Type Omni Outdoor Antenna Wiring Installation Guide
|
|
416 KB |