USB 3.0-Repeater-Verlängerungskabel 5 Meter

UE3301

Kabellänge 5 Meter
Es können bis zu 4 Kabel in Reihe geschaltet werden

ÜberblickSpezifikationenAnfrageRessourcen

 

Extend USB3.0 connection up to 20 or 25 meters (4 or 5 repeaters Daisy-Chain) distance
5 repeaters Daisy-Chain requires connecting directly to PC onboard USB (Can NOT via a USB hub)
USB3.0 5Gbps Super speed, backwards compliant with USB2.0 and USB1.1 devices.
Plug-&-Play, hot swappable
Built with a DC power jack for accepting an extemal power adapter for more power when needed
(Power supply is not included)
Over current detection and protection

Connectors:
– USB A Male (for host side)
– USB A Female (for USB device)
– DC power jack (DC5V, 2A, 3.5*1.3mm)
Data Transfer Rate: 5Gbps (Max.)
Cable Length: 5 meters
Power mode: USB bus powered, DC external power (DC5V, 2A)
Operating temperature: 0 °C ~ 50 °C
Storage temperature: -40 °C ~ 55 °C
Approval: CE, FCC

DC Power Jack for accepting external power adapter:

Max. number of repeaters in Daisy-Chain:

Up to 4 repeaters Daisy-Chain when connecting to PC via a USB hub.
Up to 5 repeaters Daisy-Chain when connecting directly to PC onboard USB.
External power supply for repeater:

When connecting a device as 500mA or higher without its own power supply (such as 2.5″ HDD):
4 or less repeaters in Daisy-Chain:
One external power supply should be added to the last repeater.
5 repeaters in Daisy-Chain:
Two external power suppies should be added to the last two repeaters (the 4th & 5th repeaters).
Power added to the 4th repeater because power becomes not enough in the 4th repeater.
Power added to the 5th repeater in order to ensure the 5th repeater having enough power delivering to the 4th repeater.

When connecting a device less than 500mA (such as pen drive, keyboard, mouse) or a device as 500mA or higher with its own power supply (such as a powered 3.5″ HDD):
4 or less repeaters in Daisy-Chain:
The external power supply for repeater is not needed.
5 repeaters in Daisy-Chain:
One external power supply should be added to the 4th repeater (NOT the 5th) because power becomes not enough in the 4th repeater.

    Bitte füllen Sie das folgende Formular aus und senden Sie es ab. Wir werden Ihnen so schnell wie möglich antworten.