Convertidor USB a RS232

US232

chip FTDI

Descripción generalEspecificacionesInformación sobre pedidosConsultaRecursos

Este conversor de puerto serie USB a RS232 es el accesorio ideal para computadoras portátiles y de escritorio que no tienen un puerto serie COM o DB9. Compatible con Windows, Mac, Linux y Android para un rendimiento rápido, es una solución de conectividad conveniente para sistemas de automatización industrial, instrumentos científicos, sistemas de punto de venta y otras aplicaciones industriales y de consumo especializadas.

Indicadores LED de Tx y Rx

Indicador LED TX y RX

Todo el protocolo USB manejado en el chip FTDI.

Los controladores libres de derechos eliminan la necesidad de desarrollar controladores USB en la mayoría de los casos

Soporte de interfaz UART para 7 u 8 bits de datos, 1 o 2 bits de parada e impar/par/marca/espacio/sin paridad

Protocolo de enlace totalmente asistido por hardware o software X-On/X-Off

Velocidades de transferencia de datos de 300 baudios a 250 kilobaud en niveles de voltaje RS232

Búfer de recepción de 512 bytes y búfer de transmisión de 512 bytes que utilizan tecnología de suavizado de búfer para permitir un alto rendimiento de datos

Tiempo de espera del buffer de recepción ajustable

Protección ESD en E/S RS232 que excede ±15 kV de descarga por espacio de aire IEC 1000-4-2, ±15 kV para modo de cuerpo humano (HBM) y ±8 kV de descarga por contacto IEC 1000-4-2

Protección ESD en líneas USB que superan ±2 kV para el modo de cuerpo humano (HBM), ±200 V para el modo de máquina (MM) y ±500 V para el modo de dispositivo cargado (CDM)

Baja corriente de funcionamiento y suspensión USB

Bajo consumo de ancho de banda USB

Compatible con USB 2.0 de máxima velocidad

Rango de temperatura de funcionamiento ampliado de -40 °C a 85 °C

SO compatible Windows 7 / 8 / 8.1 / 10 32,64-bit
Windows Vista
Windows XP 32,64-bit
Windows XP Embedded
Windows CE.NET 4.2 , 5.0 and 6.0
MAC OS OS-X
Linux 2.6.32 or later
Android
Conector USB: USB tipo A
RS232: DB9 macho
Longitud del cable 10 cm (3,94 pulgadas)
Modo de energía Bus Powered
Tensión de funcionamiento 5VDC
El consumo de energía 5V x 90mA at Max.
Peso neto 30 gramos
Dimensión
Aprobaciones CE, FCC
Distribución de pines RS232

 

Longitud del cable US232 US232P como sigue

Longitud del cable Observación
10 cm (4″) Estándar
30 cm (11,8 pulgadas) Opcional
100 cm (3,28 pies) Opcional
180 cm (6 pies) Opcional

    Por favor complete y envíe el siguiente formulario, le responderemos lo antes posible.



    Linux VCP drivers are integrated into the kernel.

    Mac OS X10.15 and macOS 11 x64 Driver FTDIUSBSerialDextInstaller 1.4.7
    This is a Beta driver release and the installer should be run from the /Applications folder on your machine

    Check for most updated driver

    Archivo Descripción Tamaño de archivo
    pdf Windows XP Installation Guide FTDI driver installation guide for Windows XP
    1 MB
    pdf Windows Vista Installation Guide FTDI driver installation guide for Windows Vista
    745 KB
    zip Windows Driver x86/x64 CDM v2.12.36.4 WHQL Certified (Manual) FTDI VCP driver. Support Windows 7, Server 2008 R2 and Windows 8, 8.1, Server 2012 R2, Server 2016 and Windows 10. Also, as Windows 8 RT is a closed system not allowing for 3rd party driver installation our Windows 8 driver will not support this variant of the OS. You must use the Windows RT build for this platform.
    1 MB
    zip Windows Driver x86/x64 CDM 2.12.36.4 Setup (Executable) FTDI VCP driver. Support Windows 7, Server 2008 R2 and Windows 8, 8.1, Server 2012 R2, Server 2016 and Windows 10. Also, as Windows 8 RT is a closed system not allowing for 3rd party driver installation our Windows 8 driver will not support this variant of the OS. You must use the Windows RT build for this platform.
    2 MB
    zip Windows Driver CDM 2.08.24 Setup (Executable) FTDI VCP driver. Support Windows XP, Vista, Server 2003, Server 2008
    1 MB
    pdf Windows CE Driver Catalog Item Usage (AN-319) For use of the CAT files supplied for ARM and x86 builds refer to AN-319
    516 KB
    zip Windows CE 7.0 x86 Driver CAT For use of the CAT files supplied for ARM and x86 builds refer to AN-319
    33 KB
    zip Windows CE 7.0 ARM Driver CAT For use of the CAT files supplied for ARM and x86 builds refer to AN-319
    52 KB
    zip Windows CE 6.0/7.0 x86 VCP Driver 6.0 Windows CE 6.0/7.0 x86 VCP Driver 6.0
    37 KB
    zip Windows CE 6.0/7.0 ARM v4 VCP Driver Windows CE 6.0/7.0 ARM v4 VCP Driver 6.0
    42 KB
    zip Windows CE 6.0 x86 Driver CAT For use of the CAT files supplied for ARM and x86 builds refer to AN-319
    38 KB
    zip Windows CE 6.0 ARM Driver CAT For use of the CAT files supplied for ARM and x86 builds refer to AN-319
    42 KB
    zip Windows CE 4.2-5.2 x86 VCP Driver FTDI driver. Supports versions of Windows CE 4.2-5.2 based operating systems: Windows Mobile 2003, Windows Mobile 2003 SE, Windows Mobile 5, Windows Mobile 6, Windows Mobile 6.1 ,Windows Mobile 6.5
    35 KB
    zip Windows CE 4.2-5.2 SH4 VCP Driver 1.1.0.10 FTDI driver. Supports versions of Windows CE 4.2-5.2 based operating systems: Windows Mobile 2003, Windows Mobile 2003 SE, Windows Mobile 5, Windows Mobile 6, Windows Mobile 6.1 ,Windows Mobile 6.5
    40 KB
    zip Windows CE 4.2-5.2 MIPS IV VCP Driver 1.1.0.10 FTDI driver. Supports versions of Windows CE 4.2-5.2 based operating systems: Windows Mobile 2003, Windows Mobile 2003 SE, Windows Mobile 5, Windows Mobile 6, Windows Mobile 6.1 ,Windows Mobile 6.5
    45 KB
    zip Windows CE 4.2-5.2 MIPS II VCP Driver 1.1.0.10 FTDI driver. Supports versions of Windows CE 4.2-5.2 based operating systems: Windows Mobile 2003, Windows Mobile 2003 SE, Windows Mobile 5, Windows Mobile 6, Windows Mobile 6.1 ,Windows Mobile 6.5
    43 KB
    zip Windows CE 4.2-5.2 ARM v4 VCP Driver 1.1.0.20 FTDI driver. Supports versions of Windows CE 4.2-5.2 based operating systems: Windows Mobile 2003, Windows Mobile 2003 SE, Windows Mobile 5, Windows Mobile 6, Windows Mobile 6.1 ,Windows Mobile 6.5
    40 KB
    zip Windows CE 2013 x86 VCP Driver Windows CE 2013 x86 VCP Driver
    77 KB
    zip Windows CE 2013 ARM VCP Driver Windows CE 2013 ARM VCP Driver
    196 KB
    pdf Windows 98 Installation Guide FTDI driver installation guide for Windows 98 & Windows ME
    617 KB
    pdf Windows 8 Installation Guide FTDI driver installation guide for Windows 8
    1 MB
    pdf Windows 7 Installation Guide FTDI driver installation guide for Windows 7
    661 KB
    pdf Windows 2000 Installation Guide FTDI driver installation guide for Windows 2000
    388 KB
    pdf Windows 10 Installation Guide FTDI driver installation guide for Windows 10
    1 MB
    zip Mac VCP Driver OS X 10.9 to 10.14 version 2.4.4 VCP driver 2.4.4 for x64 of Mac OS X 10.9 to 10.14. This driver is signed by Apple
    62 KB
    zip Mac OS X10.15 and macOS 11 x64 Driver FTDIUSBSerialDextInstaller 1.4.7 This is a Beta driver release and the installer should be run from the /Applications folder on your machine
    125 KB
    pdf Mac OS X Installation Guide FTDI driver installation guide for Mac OS X
    1 MB
    zip Mac Driver OS X 10.3 to 10.8 version 2.2.18 FTDI driver. Support OS X 10.3 to 10.8
    412 KB
    pdf Mac customized VCP VID/PID (TN-105) Refer to TN-105 if you need a custom VCP VID/PID in MAC OS X 10.3 to 10.8
    530 KB
    gz Linux Driver x64 ftdi_sio.tar 1.5.0 All FTDI devices now supported in Ubuntu 11.10, kernel 3.0.0-19.
    130 KB
    pdf Linux Driver Installation Guide Drivers Installation Guide for Linux
    427 KB
    pdf Linux Customizing VID PID (TN-101) Refer to TN-101 if you need a custom VCP VID/PID in Linux
    154 KB
    zip Windows CE 6.0/7.0 SH4 VCP Driver Windows CE 6.0/7.0 SH4 VCP Driver 6.0
    42 KB
    zip Windows CE 6.0/7.0 MIPS IV VCP Driver Windows CE 6.0/7.0 MIPS IV VCP Driver 6.0
    47 KB
    zip Windows CE 6.0/7.0 MIPS II VCP Driver Windows CE 6.0/7.0 MIPS II VCP Driver 6.0
    45 KB
    pdf Windows CE Installation Guide Driver installation under Windows CE
    574 KB