RS232 a RS422/485

IC485AD
1 x RS232
1 x RS422/RS485
Serial Node
Addressable

Visão geralEspecificaçõesInvestigação

Able to assign address
Able to transceive in different baud rates with else RS232/422/485

This Serial Node RS-232 to RS-422/485 Converter + Addressable is an intelligent RS-485/422 to RS-232 converter it is designed for connecting RS-232 devices to RS-485/422 network and other RS-485/422 devices.

Most widely used computer systems, PLCs, and measuring equipment and industrial devices, its transmission speed, communication distance, especially the network ability is limited due to unbalanced transmission. The converter solves this problem, so you can easily build a RS-485/422 multi-drop network with your RS-232 device address assignment for each to communicate more easily.

Able to assign address for flexible applications
Able to transceive in different baud rates with else RS-232/422/485
RS-422/RS-485 transceiver
Auto direction flow control on RS-485
Addressable and non-addressable mode configurable
Transmission speed up to 115.2 kbps
High isolation voltage up to 3000Vrms
Surge protection on RS-422/485 lines
Easily setup and installation
Built-in microprocessor
Watchdog timer function included
All communication setups stored in EEPROM
Power and data flow indicator for troubleshooting

Transmission Speed : 300~115,200 bps (RS-422/485 and RS-232 can set to different baud rate)
Data Format : (RS-232) (RS-422/485 is fixed to 1 stop bit, non-parity, 8 data bits format)
Stop bits : 1, 2
Parity type : None, Even, Odd
Data bits : 5, 6, 7, 8

RS-232
9 pin D-sub female connector
Support RXD, TXD, RTS, CTS signals

RS-422
Differential 4 full duplex wires
Support TX+, TX-, RX+, RX- signals
Surge protection on signal pins

RS-485
Differential 2 half duplex wires
Support DATA+, DATA- signals
Surge protection on signal pins

Isolation Voltage : 3000 VDC
Storage Temperature Range : -40 to 80 ° C
Operating Temperature Range : -35 to 75 ° C
Power Requirement : +10V to +30VDC Unregulated with against power reversal
Case : PC with captive mounting hardware
CE Class A Conformity

    Por favor preencha e envie o seguinte formulário, responderemos o mais breve possível.



    [/su_tab]