AM142
TI chipset 16-bit resolution
4 x Analog input data acquisition
2 x Analog output
Selective as 0~10 V DC and 4~20 mA by jumper settings
ÜberblickSpezifikationenAnfrageRessourcen
Lesen von Spannungs- und Stromstärkewerten vom Analogeingang über Modbus RTU.
Senden eines Befehls an den Analogausgang zum Einrichten von Spannungs- und Stromstärkewert mithilfe von Modbus RTU.
Easy setup by software
Test and change baud rate and change device ID
Selective as 4~20 mA and 0~10 V DC by jumper settings
| CPU | 8-bit CPU |
| RAM | 64K bytes SRAM |
| ROM | 256K bytes Flash ROM |
| Analog input | TI chipset 16-bit resolution 4 channels Selective as 0~10 V DC and 4~20 mA by jumper settings Sample rate : 5 times / second (4 channels) |
| Analog output | 12-bit resolution Selective as 0~10 V DC and 4~20 mA by jumper settings |
| Seriell | RS485 x 1 port ( Terminal Block ) Speed : 9600 bps ~ 115.2 Kbps Parity : None Data Bit : 8 Stop Bit : 1 Surge Protect |
| Modbus protocol type | Modbus RTU |
| Watch-Dog-Funktion | Ja |
| Stromversorgung | DC 9 ~ 24 V , 300mA @ 12VDC Support DC Jack and Terminal Block |
| LED-Anzeigen | PWR, Rx, Tx |
| Betriebstemperatur | -10℃ ~ +70℃ |
| Lagertemperatur | -20℃ ~ +85℃ |
| Abmessungen | 90 x 60 x 20 mm ( W x D x H ) |
| Gewicht | 140 g |
| Din rail panel mounting kit | Optional |
| Zulassungen | CE, FCC, RoHS |
| Garantie | 1 Jahr |
| Datei | Beschreibung | Dateigröße |
|---|---|---|
AI AO Input & Output Type Jumper Setting Example
|
|
156 kB |
Modbus RTU protocol for analog output
|
|
111 kB |